What do furnace and ac permits in Seattle show?
In Seattle, the middle half of furnace and ac permit values runs from $7,470 to $17,390, with a median of $13,860. That is from 273 permits issued October 2023 to October 2026, adjusted to today's dollars. Seattle is the only West city in our data for this job, so the regional range is the same.
HVAC replacement checker
Fair.
Your quote sits in the middle half of what these permits show.
What 273 permits in Seattle show.
Middle half: $7,470 to $17,390.
Across regions, the median permit value runs from $11,000 in Cleveland to $13,860 in Seattle.
Free, no account. Nothing you type leaves this page.
48 permits in the tallest bar
Permits in each value band
| Permit value | Permits |
|---|---|
| under $3,100 | 18 |
| $3,100 to $5,200 | 14 |
| $5,200 to $7,300 | 26 |
| $7,300 to $9,400 | 26 |
| $9,400 to $11,500 | 26 |
| $11,500 to $13,600 | 25 |
| $13,600 to $15,700 | 33 |
| $15,700 to $17,800 | 48 |
| $17,800 to $19,900 | 31 |
| $19,900 to $22,000 | 14 |
| $22,000 to $24,100 | 1 |
| $24,100 and up | 11 |
- 2024$12,800110 permits
- 2025$14,74081 permits
- 2026$14,02062 permits
Only years with enough permits for a stable median are shown. Values are adjusted to today's dollars.
Seattle is the only West city in our data for this job, so its range is the West range.
Questions to ask before you sign
Matt's list for this job.
- Why do you recommend replacing both systems now, and what are the alternatives?Replacing a working companion unit should come with a reason you can weigh against keeping it.
- What did the separate heating and cooling calculations show, and which equipment sizes fit those results?Heating and cooling sizing can point to different needs in the same house.
- What exact furnace, outdoor unit, indoor coil, and controls make up the proposed system?A complete equipment list gives competing contractors the same installation to price.
- What duct, return-air, filter, or zoning problems need correction for this system to work properly?Comfort depends on distributing air through the house, even after every major component is new.
- What is included for refrigerant lines, venting, condensate, gas, electrical, permits, and disposal?The piping, drains, venting, and utility connections are part of delivering a working system.
- How long will we lose heating or cooling, and who coordinates the work and any extra charges?A coordinated work sequence limits the gaps between removal, trade work, and startup.
- At handoff, can I get the startup measurements, warranty terms, and confirmation of who submits registration and incentive paperwork?Commissioning records and completed paperwork give you something concrete to review at handoff.
Also worth asking
- Can you list the exact equipment and all installation changes in the written bid?Model names leave out the labor and connection changes needed to put that equipment into service.
- What does the labor warranty cover, and what maintenance or registration is required?Parts coverage may exclude troubleshooting and return visits, and missed maintenance or registration can affect your coverage.
Questions people ask
How wide is the range in Seattle?
The middle half of furnace and ac permits in Seattle runs from $7,470 to $17,390, and a tenth of permits sit below $4,100 while a tenth sit above $19,840. A quote outside the middle half is not wrong on its own, but it should come with a reason you can see in the scope, so compare it line by line.
Have Seattle permit values changed by year?
Among years with enough permits to report, the median furnace and ac permit value in Seattle was $12,800 in 2024 and $14,020 in 2026, after adjusting every value to today's dollars. We show only years with enough permits for a stable median, and we do not read a cause into the change.
Source and calibration
Seattle passed the city calibration check: its median AC replacement permit value, $8,880, is within 20% of the survey reference for its region.